Power Carved Ripple Bench

13,308

147.

16.

简介:电源雕刻纹波长凳

About: A husband & wife team. Amateur makers. Expert high fivers. New video every week (or so).

我们制作了一个简单的长凳设计和力量雕刻了一个令人敬畏的纹理!当然,如果您没有电源雕刻附件,您可以完全遵循这款简易DIY替补教程(但电源雕刻是最好的部分!)。我们有免费的3D计划和剪切清单可用:evanandkylyn.。com/project-plans

Here are the tools and materials we used:

第1步:切顶和长边

这个凳子像一个没有底部的盒子一样:4侧和顶部。我们的木材并不完全平坦,所以在做任何事情之前我们都通过我们的全部运行Benchtop Planer.。This step may not be necessary if your lumber is already good to go.

The next thing we did was cut the top piece to length (we opted for about 48" but whatever you choose is up to you). We cut it to length on themiter saw

从现在开始,我们所有的切割都不是基于测量,而是基于之前我们已经切割过的部分。所以要切两个长的边片,我们没有测量它们,我们只是用切到顶部的木板来标记它们要做多长时间。我们也用斜切锯把它们锯成一定的长度。

Then we ripped the side pieces on our台锯所以他们宽了几英寸。这将决定你的长凳看起来有多厚,而且它取决于你。

Step 2: Attach Side Pieces

Before we measure and cut the end caps, we wanted to join the side pieces to the top piece. The reason is because our wood was a little warpy, and we wanted to fix it into place by joining it so that we could get a more accurate measurement for our end pieces later. First, because our wood (pecan) had some crazy color striations going on, we lined up the side pieces under the top piece to decide what would go where.

然后我们无处不在口袋里钻洞to the insides of the side pieces and drilled all the pocket holes using ourKreg jig

我们把我们的侧片和顶片的底面连接在一起胶水,我们穿过袋孔。胶水是大多数强度来自的地方,但是口袋孔允许我们确保一切都留在原地并没有转移。我们也为此扣除了大夹具,我们Bessey clamps,并使用那些让一切保持一切对齐,同时拧到袋孔中。

第3步:切割和连接端部件

Once the side pieces were secure, we measured the openings left for our end caps and cut the end caps to size on our miter saw. They fit in quite snuggly!

我们使用与侧件相同的方法连接:我们钻出袋孔,涂上一层胶水,并使用袋孔将它们连接到工作台的下面,同时用夹子固定。主要区别是我们也做了一些侧身口袋孔,就像你在照片中看到的那样。这使我们可以将端盖附加到侧件。

第4步:沙子和腻子

Next we sanded, sanded, and sanded a little bit more. We started with a low gritbelt sanderbecause (like we mentioned before) our wood was a little warpy and so there were some spots where we had to knock off quite a bit of material to get it all flush. Belt sanders will generally take off more material, and the low grit obviously helps too.

Next we used the随机轨道砂光机with higher grit. This gave our flat surfaces a nice smooth finish. We skipped the top of the bench because we knew we'd be power carving it down, but if you're not adding the carved texture you can go ahead and sand the bench top too.

接下来我们使用了一个打磨块来手动沙子,足以让边缘脱落,所以它们并不尖锐。

We added a little wood putty to any areas that had gaps, and hand sanded down those areas as well.

第5步:添加腿

对于腿来说,我们想要保持真的很简单。我们想要现代和角度的东西平衡我们添加的有机纹理,所以我们去了hairpin legs。They were easy to attach: we marked where the attachment holes were on the underside of the bench, drilled pilot holes in the spots we marked, and then screwed the legs to the bench.

此时,您还有一个完全可接受的长凳,如果您没有,可以进入整理步骤涡轮飞机to power carve it.

第6步:电源雕刻!

这是我们最喜欢的部分!电源雕刻!!如果这是您第一次动力雕刻,我们绝对建议首先练习一些废木,以便掌握工具处理方式。我们使用了arbortech涡轮飞机它附着在一个grinder, and we'll list our tips for achieving this texture below:

  1. Carve so that the wheel is cutting with the grain, not against the grain. In the video we show how it looks cutting with vs against, so you'll definitely know if you're doing it correctly or not. Against the grain leads to a lot of tearout, whereas with the grain ended up really smooth.
  2. Have a light hand. The tool is really powerful and you don't want to cut away too much material if you're going for this texture. We didn't use much downward force, just lightly pulled the tool along the wood's surface, pulling it towards us so it created more of a pocket and less of a sliver of cut area.
  3. 随机放置削减,以便您不会意外形成可见模式。我们认为纹理在随机之后最好。同样,这可能更容易看出我们在视频中的方式。
  4. 别忘了切割所有的方式,以使纹理出血的顶部。

第7步:整理

We gave our newly power carved texture a light sanding by hand (surprisingly, it didn't take much at all!). Then we finished the wood with虫胶。我们选择了贝拉克,因为我们以前使用过,它真的宽容。这不是最耐用的饰面,但它很容易。用这种纹理,我们想要轻松!在视频中,我们使用了毛刺刷子,因为这是我们手头所做的一切,但我们建议使用它与泡沫刷子。刷在薄薄的外套上。

提示:您可以在陡峭的角度闪烁一条陡峭的角度,使您的完成更好地看到什么斑点太厚或薄(我们在视频中展示它)。

虫胶raises the grain, so we came back and lightly sanded it down by hand using a combo of 320 and 600 grit sandpaper. The first round of sanding required a little more than usual - we aren't sure if it was the texture or the pecan wood we were using. Then we applied a second coat of shellac, and when it dried repeated the light sanding process.

第8步:完成!

And that's it! The bench turned out beautiful and the texture is so satisfying to touch haha. We really love the results of this project.

......................................................................
您也可以找到我们:
YouTube(所有我们的DIY视频)
Instagram.(潜行偷看@evanandkingsn)
帕勒顿(如果你想支持我们,但没有压力!)
我们的网站(includes tutorials from our pre-YouTube days)
Pinterest.(stuff that inspires us)
推特(us, in 140 character doses)
Facebook(做我们的朋友)
......................................................................
注意:这篇文章包含附属链接。谢谢你对我们的支持!

是第一个分享

    建议书

    • 锡箔速度挑战

      锡箔速度挑战
    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest

    16.Discussions

    0.
    Moats定制木工

    2 years ago

    看起来超棒。arbotech turbo飞机有点昂贵。我有一些砂轮,我们常常从一些瓷砖上获得膏药和干墙,我们正在重复起作用。虽然,请带我3个小时的更好的部分时间来雕刻所有的涟漪。

    0.
    jessyratfink

    2 years ago

    顶部是华丽的!看起来像海洋。:)

    0.
    evanandkylyn.

    2年前回复

    谢谢您!我们还以为它看起来像水呢!

    0.
    Penolopy Bulnick.

    2 years ago

    Carving out the ripples does look like fun :)

    0.
    evanandkylyn.

    2年前回复

    Oh my gosh yes so much fun!!

    0.
    Clensyourpollet.

    2 years ago

    I really love how this turned out. Was the arbortech worth the cost. Do you have and future projects planned for it?

    0.
    evanandkylyn.

    2年前回复

    如果你打算做很多雕塑,那绝对值得。比角度研磨机砂光垫更好,因为它持续较长,剥碎更快。是的,肯定想尝试将它与一些CNC结合起来迅速获得酷形状

    0.

    2 years ago

    使用一个固体的木材板,使用四个八英寸的木材,为替补的腿......

    0.
    evanandkylyn.

    2年前回复

    只是等到我们的下一个项目!认为它可能是您可能更喜欢的东西,基于您的评论:)

    0.
    anniekate76

    2 years ago

    It's beautiful! Do the hairpin legs sink into the ground when it's muddy out though?

    0.
    evanandkylyn.

    2年前回复

    这真的是一个室内长凳,但以为我们会在公园里拍摄一些漂亮的镜头:)

    0.
    HP_II

    2 years ago

    替补席上了伟大的,工作很好!

    0.
    evanandkylyn.

    2年前回复

    WOO, appreciate the nice comment!

    0.
    Makerneer

    2 years ago

    哇,涟漪真的很好地完成了替补席。伟大的项目。

    0.
    evanandkylyn.

    2年前回复

    非常感谢!我们现在想向现在添加涟漪!

    0.

    小费2 years ago

    Use a solid slab of lumber, and use 4"x 8" timbers for the legs of the bench...