发光的漫画/动漫性格眼镜

16,255

144.

17.

简介:发光的漫画/动漫性格眼镜

当任务为我当地图书馆的青少年漫画和动漫俱乐部创建词干活动时,我几乎立即知道我想做一双可怕的闪亮眼镜,先前见过一个viral video别人创造了自己的一对。

由漫画书和漫画/动漫字符流行的拖车,如凯文从漫画书系列转动电影罪恶之城kyouya ootori来自漫画/动漫乌南高中寄宿俱乐部,眼镜似乎是一个适合一群人,这是一群很可能是崭露头角的戏剧性的青少年,并且鉴于牵引者的普及,青少年可以利用玻璃用于各种各样的人格服装。然而,视频中的一对灯光眼镜是 - 在我看来 - 不必要的笨重和复杂,特别是对于我的两小时课程的时间限制。因此,在提出自己的设计时,我知道我希望以两种方式偏离原版:

First, I needed to create the glasseswithout the use of a soldering ironbecause, even if I had the time to teach approximately 15 teenagers how to solder, there wouldn't be enough irons to go around, and taking turns using the one or two available soldering irons would cut into precious class time.

其次,我想将电源整合到实际眼镜中eliminate the cumbersome wires and battery在原始设计中使用的包。我知道青少年将欣赏紧凑和便利,不必在拍摄自拍或戴上眼镜时占据视线,或者作为角色扮演的一部分。

不使用的烙铁电气康涅狄格州ections really limited my options, but it also made the Lilypad-style coin cell holder the obvious choice for my project because of its integrated on/off switch and circular connection points for easy no-solder wiring.

用品:

材料

    - (一对)带塑料透镜的假眼镜

    - (2x)带开/关开关的LILYPAD硬币电池电池座

    - (2x)CR2032硬币电池电池

    - (4x)5mm白色LED二极管 - 扩散

    -米色遮蔽胶带,1.88英寸厚

    -Black cardstock

    Tools

      -Fine grit sandpaper

      -Hot glue gun

      - 剪刀

      - 钢笔

      -Needle or safety pin

      第1步:准备镜头

      In order to create the scary shiny glasses, the lenses need to be prepped so that the light from the LEDs is diffused and appears to glow like a computer monitor in a dark room. This is achieved by making the lenses less transparent.

      We begin by gently removing the lenses from the frame [Image 1.01] and taking fine grit sandpaper to the backside of the lenses (the side closest to your face when the glasses are worn), moving the sandpaper in a circular motion until the lenses become cloudy [Image 1.02]. To further increase opaqueness of the lenses, take a piece of ~2-inch-wide masking tape and attach it to the back of the lenses, sticky side touching the lenses [Image 1.03]. Trim away the excess tape from the edges [1.04].

      The lenses will now diffuse the light, but before you can pop them back into the frame of the glasses, there is one more step to complete...

      Step 2: Mapping the Electronics

      拿起镜头并将它们追踪到一些卡片或其他薄的不透明材料上[图像2.01]。卡片存款有两个目的:

      -To provide a surface for mounting the electronics.

      - 阻挡光,使LED在戴眼镜时不会让您失明。(如果你已经弄清楚了它,你将无法在穿着它们时看到眼镜,但你可以轻松同行它们。)

      接下来,拍摄leilypad风格的电池座,将它们放在镜头概述的中心,在卡片上画出,然后在它们周围追踪,确保标记和标记负极和正孔所在的位置[图像2.02]。

      围绕镜片的轮廓切割,在外部边缘周围留下额外的卡片[图像2.03]。一旦将它们切出,拿一个针或销钉通过卡片,在那里在轮廓上标记LILYPAD的负面和正连接[图像2.04]。

      当您在下一步构建眼镜时,这些切口将是您的装配图。

      第3步:组装眼镜

      首先,轻轻弹出镜头回到眼镜的框架[图像3.01]。

      Take two LEDs and bend the anode (longer, positive leg) and cathode (shorter, negative leg) of each LED outwards and away from each other [Image 3.02]. Next, align one Lilypad battery holder with the diagram on the cardstock [Image 3.03] while on the backside [Image 3.04] you feed the legs of one LED through the positive and negative holes on diagram and on the Lilypad. Repeat the processes with a second LED and bend the wires of both LEDs around their respective holes (positive to positive, negative to negative) on the Lilypad to ensure a tight connection and a closed circuit [Image 3.05].

      注意:I arranged my LEDs so that they both point inwards towards each other. If you want to have yours facing out, there's no reason you can't, and the end result will likely be the same. The important thing is that the anode and cathode are aligned with the correct holes.

      将电池添加到leilypad中,然后将电源开关翻转到“ON”位置以测试连接[图像3.06]。如果将LED连接到LIL3AD上的相应孔,但一个或两个LED不会打开或闪烁,因此是因为连接不强。

      The best way to establish a strong connection is to solder the LEDs to the Lilypad, and if--unlike me and my class of teenagers--you have the opportunity to solder the connections, do so now. Otherwise, if you're following along for the no-solder method, bend those wires as tight as possible around the positive and negative holes in the Lilypad and use hot glue to secure them in place on both the Lilypad [Image 3.07] and back of the cardstock [Image 3.08] to prevent the wires from shifting.

      After the hot glue has dried on the Lilypad and cardstock, add more hot glue around the inside rim of the glasses [Image 3.09] and glue the cardstock in place with the LEDs facing the lens of the the glasses [Image 3.10]. Trim away any excess cardstock peeking around the frame [Image 3.11].

      重复另一个镜头的所有先前步骤,您的发光眼镜都完成[图片3.12]!

      第4步:成品眼镜

      Now that your glasses are ready to wear, it's time to go hang out in dark rooms and plot to take over the world!

      Book Character Costume Challenge

      二等奖
      Book Character Costume Challenge

      5人制作这个项目!

      建议书

      • 胶合板挑战

        胶合板挑战
      • Plastic Contest

        Plastic Contest
      • 电池供电的比赛

        电池供电的比赛

      17.Discussions

      0.
      chiken wings

      13天前

      你能看到这些吗?即使你不能看起来很恶心

      0.
      Ramenkingandi

      2天前回复

      不,你看不到他们,但它相当容易看到它们的顶部。

      0.
      chiken wings

      2天前回复

      凉!

      0.
      TrippMaine-13.

      4个月前

      很酷,我实际上可以做的东西!我有时间检查(以及哪里)我可以获得所有的用品!我很想给人们常常和这些吓唬,所以经常与这些吓到......

      2
      CLSV

      1年前

      我绝对喜欢这个想法!不幸的是,我的图书馆只需为所有青少年买足够的Lilipads而没有预算。任何试图尝试的建议可能会耗费一点?

      0.
      Ramenkingandi

      答案1年前

      你不知道吗?我必须在没有LILYPAD电池座的情况下创建此活动的版本,因此如果您的图书馆无法在散装中购买LILYPADS,这是一个更便宜的替代品。这有点最后一刻,因此我只有附加的图像为您提供指示,但如果您有任何疑问,请随时询问。

      I will say, though, that in execution, this activity is easier for younger kids using the Lilypads. When using the brads to complete the electrical circuit, a few of the kids had trouble getting a secure connection between the brads and the LEDs, which resulted in glasses that either had flickering or non-functioning LEDs. The activity also took about 2 hours to complete.

      0.
      CLSV

      回复1年前

      感谢您再次与我分享!我昨天尝试过这个,它变得非常好。我没有任何长长的布拉德,所以我通过弯曲并使用纸夹来改善积极的领导,而是游泳!现在我只需要在船上获得一些青少年来制作它们!再次感谢!

      0.
      Ramenkingandi

      回复1年前

      别客气!很高兴它锻炼了!

      0.
      CLSV

      回复1年前

      非常感谢!我必须检查一下它!

      0.
      Ramenkingandi

      答案1年前

      嗯......好吧,你可以在亚马逊散装中购买Lily3ads,以获得更好的速度(20美元,而25美元而不是2美元,因为7美元挂在材料中),这就是我的图书馆所做的。如果仍然高于您的预算,则可能导致纸质电路(https://www.youtube.com/watch?v=c88juvxszko.) with copper tape that would be more economical, but it would require a little more planning to get the circuit to fit on the frames, especially if you still want to use two LEDs per lens.

      0.
      WinneremeralD12

      1年前

      Ahhhhhhhhhhhhhhh为漫画投票。
      Satoru Fujinuma ...当然是旧版。

      1
      Ramenkingandi

      回复1年前

      Thanks for the vote!

      1
      TossManual

      1年前

      凉。

      下一步:你可以穿的,仍然走在街上或通过派对。

      0.
      Ramenkingandi

      回复1年前

      It's actually pretty easy to peer over the frame of the glasses. I have no trouble navigating a room while wearing them.

      1
      Pooboman.

      1年前

      等待这真的很棒