GhostBusters Zombie Taxi Driver

3,412

24.

4.

简介:幽灵熊僵尸出租车司机

:我是一个制造商和艺术家。我构建的家具,props, decorations and anything else that comes my way. Halloween is my time to shine and I build countless outdoor props which I have decided to begin documenting. …

僵尸出租车干燥器只有在原始鬼票人的屏幕上只有大约15秒,但它对我来说是一个真正的印象。去年建立碎片后,我决定让另一个幽灵敢死队最喜欢。今年的时间更少,我选择了僵尸,因为这将是相当容易的。所有步骤都非常容易,但面部雕刻除外,但不要担心它不必是屏幕准确才能令人敬畏。

Supplies:

  • 塑料骨架
  • 5个kwik木材
  • 白色礼服衬衫
  • 老对牛仔裤
  • 一鞋子
  • 会员只有夹克
  • 新闻帽子
  • 25 mm塑料眼球 - https://www.amazon.com/gp/product/b00eq28xrk/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=utf8&psc=1
  • silicone caulk
  • 石脑油
  • plastic sheeting
  • 热枪
  • 一个老假发。

第1步:头骨

绝对是建设中最困难的部分也是最有趣的。雕刻脸。如果你看看电影中的僵尸,他与我沃尔玛骨架的廉价塑料头骨有很大不同......但这是用kwik木材固定的。您可以使用Sculpy或许多其他基于Putty的环氧树脂,但我喜欢Kwik Wood。它很快,但不是太快,所以你有足够的时间来与它合作并塑造你的功能。

在许多方面,这就像假装是一个法医的加水,将组织添加到头骨上。使用电影中的图像作为您的指南,以建立眉毛,颧骨,尤其是下颌。您会注意到在您的骨架上的电影中更加明显。它可能需要几轮来才能吧。当您完成基本功能时,使用精神刀切断眼睛的空洞。

第2步:眼睛

为了更好地安装眼睛,您可能想要将舱口划分为头骨后面,以便您可以访问内部,因为我没有必要,但请记住它始终是一个选项。拿一些kwik木头并揉搓直到它准备模具。然后在其中一个塑料或玻璃眼球上创建眼睑。然后通过头骨后面推动眼睛进入适当位置,使眼睛看起来沉入头骨。从那里使用一个小型工具来将腻子混合在保护眼睛的颧骨外面。对第二只眼睛做同样的事情。确保你的眼睛有足够的白色,以便当光线闪耀到脸部时,虹膜是可见的。如果眼睛本身太暗,甚至没有这样的设置......没有人会看到它们。

第3步:头骨涂料

At this point your skull is looking pretty good. Now you want to put on the base coats of paint before the corpsing process (which we will get to later) Using browns, purples, deep reds, and yellows paint what you imagine the rotted muscle, and skin would look like. Try to use gloss colors as it will give it a wet appearance that will peek out from under the final silicone skin layer. Now remember when you are doing this, not everything here is going to be visible in the end product. This is an undercoat...almost like a primer coat . anything exposed after corpsing can be touched up after the fact.

第4步:收缩包装骨干

暂时离开身体的头部,所以你可以工作不受控制。你会想试试身体上的衣服,并与您的最终产品的衣服构成。记下露出身体皮肤的地方,因为没有浪费材料的浪费材料,没有人会看到。我的建议是将尸体限制在上胸部,颈部,手和脚上。

脱衣服并将您的区域标记为尸体。

We are going to start with the chest. and shoulders. spray the bones with spray adhesive and wrap the plastic sheeting around the chest, up over one shoulder , down under the opposite armpit, and over the other shoulder. Do this a couple times to build up some thickness and then hit it with the heat gun. Shrink it until it clings to the skeleton. Do the same with the Skull, imagining the shrinking plastic is the top layer of skin. make sure to not coat the eyes or teeth.

第5步:颈部

On our Zombie,The additions to the skull ave made it heavier that it was before. If you reference the picture you will notice the neck is still very thin. However you will want to add a bit of structure to this to hold up the head.You can either stabilize the spine into the skull with a dowel rod, or mold plastick into the neck muscles as support. Add the Sternocleidomastoids by rolling two columns of plastic place in a v pattern on the neck where the collar bones meet branching out to just behind the ear area of the skull. Wrap in two or three layers of plastic and then shrink with the heat gun. Follow up with paint and or stain and repeat.

第6步:硅胶骨干

Now that the undercoat of paint on the skull is dry we need to make the rotting silicone skin. Take your silicone caulk and empty it into a mixing bucket with approximately 1/2 cup of Naphtha.You are going to want to do this in a well ventilated area and wear any respirator or mask you feel is necessary. You will stir this concoction up until the silicone is suitably thinned that you can paint it onto your skull. Add some red and brown paint or stain until its the proper color for your corpse, and then begin to slop it on. Once you have the coating you want, let the whole thing dry over night. When this dries it will be a thin rubbery skin like coating. So make sure not to cover the teeth or any gaping wound areas. after it dries you can pick at it to give it that rotted skin look. you will also be able to poke wig hairs into the silicone to add the wispy hairs.once dry you can add more coats to reach the desired rot, and then touch up your paint job adding highlights and shadows. You may want to hit the whole thing with a clear-coat if this is going to be outside.

第7步:穿好衣服。

让你的家伙穿着,进入位置,你很高兴去。根据您的生活在哪里,您可能想要热胶或将帽子装订到头部。风可以用一个很好的阵风服用它。此外,如果您愿意,您可以清除一个旧的方向盘或作为道具制作一个。享受自己的个人出租车司机。

万圣节比赛2019年

参加了这一点
万圣节比赛2019年

是第一个分享

    建议书

    • Pi日速度挑战

      Pi日速度挑战
    • Trash to Treasure Contest

      Trash to Treasure Contest
    • 雕刻和雕刻挑战

      雕刻和雕刻挑战

    4.Comments

    0.
    Elvenwishes

    4个月前

    各级令人敬畏。我已经完成了今年的大部分令人毛骨悚然的僵尸,但现在我要把这个人打了明年,他把我爬出了如此现实。:)从西澳大利亚和Happy Halloween 2020留下安全:)

    0.
    WinneremeralD12

    1年前

    韦尔普。我今晚有梦魇。投票,顺便问一下。杰出的工作,因为它真的吓坏了我

    0.
    Pfeiler制造

    回复1年前

    哈哈 。谢谢你 :)

    0.
    Seamster.

    1年前

    非常好,我喜欢结果!:D.