椰子碎片工具

6,225

50

7.

Introduction: Coconut Shredding Tool

About: Programmer/software developer, lover of food, photography, and playing in the wood shop.

有一个整个椰子,想要把椰子从中拿出来吗?你可以用刀,但是你最终会在椰子和椰子中的羊肉之间的棕色层的大块。此外,除非你在切割出来后撕掉它,否则你将有块椰子,这需要更长的时间来干燥。那么为什么不向波利尼西亚人学习,并让自己成为椰子碎工具?

当我第一次在度假时看到这个时,我对它的努力印象深刻。回来后,我设法使用我踢掉的一些材料来制作自己的这个工具版本。在这方面,我会告诉你如何制作自己的椰子碎工具。

You will need:

Materials:

  • 一块金属,大约3英寸宽,长8英寸,1/8英寸思考(或者对于那些说明度量的人,那些大约为7.5厘米×20厘米,至少3毫米)。理想情况下,如果您想制作持久的工具,您应该使用不锈钢。我的第一次尝试使用了Mild Steel,它的工作正常,但你需要更加谨慎并在使用它后立即干燥工具。
  • 一个足够长的董事会坐下来。在我的情况下,我有一个来自上一个项目的奇怪的MDF(中密度纤维板)。这里的目标是创建一个功能工具,所以这块木材不一定是一个花哨的东西。
  • 2个螺钉或小螺栓。

工具:

  • Something to cut the metal. If all you've got is hand tools, you can probably do this, but it'll take a while. In my case, I used an angle grinder to cut the rough outline.
  • 研磨工具,例如角度研磨机或台式磨床。
  • 具有能够切割成金属的旋转工具。我使用了一款廉价的切割轮。理想情况下,稀释剂越好。(如果您可以访问金属切割带锯,那也可以工作)。
  • 钻头和钻头,与螺钉相同。

At last but not least, you'll need a bit of time - especially if you're working more with hand tools.

记得在努力工作时佩戴适当的安全装备。磨削/切割金属时,请记住佩戴适当的眼睛保护。操作响亮的工具时,请记住戴听力保护。此外,一副手套可以用这个项目派上用场,因为你会处理合理的锋利的金属。这里的目标是撕碎椰子,而不是你的手指!

步骤1:将金属切割成粗糙的形状

(I don't have a picture of this step, as I was able to reuse a piece of metal from a previous project that happened to be just the right shape. That's also why I have dents in the middle of my piece of metal. The above picture should give a general idea, nonetheless).

你寻找的是大约形状shape of a flattened spoon - or a circle on a stick. The circle part should be the full width of your piece of metal, and will become the shredding head. The curve of the circle should be smaller than the average diameter of a coconut. The 'stick' portion should be roughly 1 inch (2 -2.5 cm) wide, and will eventually be mounted to the board.

Once you've got your rough shape, use your grinding implement to make it as circular as possible.

第2步:斜面圈的边缘

Next, you'll want to grind just the 'bottom' edge of the circle. The idea here is to bevel the edge, making it reasonably sharp in the process. Don't worry about getting it razor sharp, as it isn't necessarily this sharpness that will be doing the shredding. You'll only need to bevel one edge of the circle - the 'stick' portion won't be doing any cutting.

上图显示了斜切的斜面上的斜面。

第3步:将锯齿切入边缘

使用旋转工具(甚至是金属切割带锯),从一个边缘开始并开始切割成圆圈的边缘。这些锯齿是将换椰子碎片的能力。锯齿不必完全间隔,但尝试尽可能保持静音。在我的情况下,它们分开大约2-3毫米 - 或比我的切割盘更宽。这可能需要一段时间,但要耐心等待。您可能需要定位自己,使切割盘的旋转对金属的旋转不会导致任何手中翻转。

第4步:钻孔安装孔

在工具的长“棒”部分,钻有金属的两个孔。如果您的板是一个大或奇怪的形状,您可能希望将其缩小到大小 - 足够大的东西,你可以坐在那里,但足够小的东西,它不会太繁琐。

If you used a thinner piece of metal, you may wish to cut your wood so that it has a protrusion that will sit underneath the round part. This will allow the wood to take some of the force, preventing the metal from bending when you are shredding coconuts.


Line up your freshly created coconut tool with a corner on the wood, and drill two pilot holes. Place the metal tool so that the beveled edge faces down, and the non-beveled edge faces up. Screw the tool down to the board. It doesn't matter too much if the screws poke out the bottom, as they will be underneath the board, and will be hanging off the chair or stool that you'll be sitting on when using this.

Step 5: Shred Some Coconut!

将董事会放在椅子或凳子上。(你可能希望在外面做到这一点,因为它可以变得有点凌乱)。在手中拿一半椰子,并用双手的手掌牢牢抓住它。将椰子的内部摩擦对阵锯齿 - 椰子应从壳体内部切断。在每个地方进行几次通过,确保你不太深受剪切。(粉碎太深将导致切碎的椰子中的棕色位)。一旦你从壳体内部的一个地方获得了大部分椰子,就把壳移到手中,然后从另一个地方撕掉。这有点像一个内外石灰 - 你不想在任何特定点起到太多,但你不想留下太多的材料。

There's a ton of things out there you can do with your shredded coconut. At this stage it is quite wet - you can squeeze out the coconut milk/cream. You may wish to dry it out and roast it on a cookie sheet. Emptied coconut shells can be used for other neat projects, like serving bowls (for your next tropical themed party).

When you are done shredding your coconut, unscrew and remove the tool from the board. Carefully wash the tool by hand and dry it off, making sure it's clean for the next time you use it.

快乐的椰子碎!

椰子挑战

亚军
椰子挑战

金属竞赛2016年

Participated in the
金属竞赛2016年

是第一个分享

    建议书

    • 组织者:学生设计挑战

      组织者:学生设计挑战
    • 家庭装饰挑战

      家庭装饰挑战
    • 家具比赛

      家具比赛

    7.Comments

    0.
    Ravijag.

    4年前

    See the varieties we get the same tool in India online :). If u visit an indian store anywhere in the world, good chance that you can pick up one :). Good tool from a DIY angle from the author! Kudos.

    http://www.amazon.in/Nestwell-Stainless-Coconut-Sc...

    PS:我没有认可品牌。只是一个样本。请参阅页面下面的产品以获取更多种类。

    0.
    sautie

    4年前

    In Philippines, we put four serrated rounded blade to a shaft attached to an electric motor and shred a hundred coconut.

    0.
    JoelBennett1

    回复4年前

    I bet that works much faster!

    0.
    rbclima

    4年前

    They sell tools just like that in brazil

    0.
    JoelBennett1

    回复4年前

    I wouldn't doubt it. Since there's not too many coconuts up here in Canada, so finding a tool like that up here would be nearly impossible.

    0.
    rbclima

    回复4年前

    与你的呵呵呵非常相似!

    0.
    JoelBennett1

    回复4年前

    哈哈,我喜欢它!