博罗Inspired Vest From Old T-Shirts

2,004

50.

13

简介:Boro启发了旧T恤的背心

嗨...你好......你想要一个背心吗?一个好的!是的?所以,你可以做到!也许甚至不错......甚至可能是两个......或三个......或......

好吧......好的,这是一个背心。它是由旧T恤制成的,看起来很有趣。但在详细介绍其使其使得我想说的过程中,尽管是一个很好的第一次尝试,这个项目并不是我的最终成功。这是我不是伟大的下水道,并有一点经验,让这样做这样的东西。此外,这是第一次尝试很伟大的项目之一。有些事情在我期望的时候没有工作,它看起来有点丑陋...所以我在教程中添加了这些方面,因为你不要重复我的错误。还有说,一般的想法和整个概念都没有错,所以在更有经验的手中,它可以比我的更好,我建议尝试。

Initialy I wanted to make a hoody but eventually I decided that jumping over my own head is a theam for another instructable. Although, concidere it being a clallange if you're up to it.

步骤1:

So, I've got a bunch of t-shirts, generously donated to me by my older brother. They're one size bigger than I prefare and I have enough of my own t-shirts to wear, so I really had no use for them... Well, untill I've got this idea.

对于这个项目,您将需要几件T恤。也许是你的老人,或者你可以在secon手店买一些。如果他们有一些小洞,它甚至可以。对于我的背心我使用了4(我最终没有使用照片上的蓝色),但甚至7是一个合理的数字,如果你想得到更厚,更温暖的背心。

随着一个对比色的衬衫,您可以在您的设计中实现一些漂亮的装饰效果,只要我所做的,但它是艺术实验的广泛领域,因此您可以尝试不同的彩色,或者,在相反的情况下,使其变得非常简单。

You're also going to need a relatively large ammount of thread and a sewing machine along with some different common tools and supplies. And if you're good at handstitching and don't mind doing a lot of it, you can accomplish this project without a sewing machine, although from some point in the tutorial the procedure will be somewhat different for you in this case.

Step 2:

But before continuing I want to say a couple words about the inspiration behind the project.

博罗是传统日本赠款技术的名称,它通过将它们缝制到带有多个针脚的衣服上(主要是平行线)来实现将布料涂抹在衣服上。在旧时代面料非常昂贵,所以更富有的人曾经在这次诉讼中追认他们的和服。在贴片的时间层上累积制造布料厚度,从而使衣服更适合较冷的天气。

在Boro Fabrics的照片上,您可以看到高点上的布经常摩擦,通过它使底层的不同颜色可见的织物层。这会产生有趣的无意装饰效果。

这样的实用方面是这样的东西,我正在寻找博罗纺织品的整体美学,所以在我的项目中,我试图复制两者,而不是严格直接的方式,而是在更多程式化的福利。

Step 3:

所以,让我们开始。

整个项目的重要组成部分是T恤形状的框架,衬衫将在进一步的步骤中进行更加方便的处理。我由一块坚硬的瓦楞纸板制成。

First, I marked rough shape using some of the shirts I've got. Then I defined and enlarged it with the ruller. The frame has to be a bit larger than the t-shirts themselves, so that when being pulled on they were uniformly stretched, but not too much though.

后来加入了拖把件。他们可能需要有必要的是,能够弯曲或弯曲以使衬衫旋转可能。

Step 4:

When the is done it's time to pull the shirts on it (ontop of each other ofcourse).

您可以使用对比色衬衫首先在衬里内创造生动。如果有的话,你可以将其翻出来,使照片或图案设计可见。你可以做到相反,或者使它们所有不同的颜色。正如我所说,这取决于你,但在这里,我会告诉我所做的事情。

So, two first t-shirts I polled on the frame are black. The third one is yellow. And the last one is black again.

Step 5:

压扁皱纹并用销固定边缘。同时尝试不要太多伸展织物垂直。

在衬衫堆叠上使用合适的工具和模板标记叶片:

——通过中间前面垂直线(centre line);

- vertical line through the middle on the back (centre line);

- 底部的水平线;

- 继续衬衫上衬衫的侧面的虚线标记在机器侧面上的碎片;

- 颈部周围的弯曲线;

确保线路的末端在两者上都在:前后侧。

Lines at the bottom, at the sleaves and around the neck are meant for cutting off pieces at further steps. While positioning those lines make sure all the layers of fabric will be presented on the edge, when the cuts will be made.

沿中线剪也goi面前ng to be made later but in somewhat different way and I'll talk abot it separately.

Step 6:

The zipper is going to be implemented on the vest, so I'm marking two more lines a bit wider than thezipper itself using in the center line on the front sor reference.

第7步:

我正在将额外的线路挂钩标记为那些通过向T恤的身体向内踩到1,5-2cm而致切割的人。那些是缝制的。

第8步:

Findy,我通过所有“缝制”线(在底部,颈部围绕颈部的底部)塑造了所有四层,由后面的中心线和我之前标记的两个“拉链”线。

Step 9:

I'm also marking and basting four vertical intermediate lines. It will help to keep layers from sliding and shifting too much during further operations.

Step 10:

现在是时候拿走拉链了。

你需要其中一个分两个在两件中分开的时候。我首先推荐购买拉链,这样你就可以根据它的长度来标记你的T'Shirts。我在我妈妈的救助拉链中找到了我的婴儿篮筐,而最适合的扑克篮子里有点太长了。如果出于某种原因,这也是您的情况,我会显示,在下一步中你可以做些什么。

So, first of all I'm cutting two top layers (half of the total number of layers |'ve got) of fabric along the center line on the front and positioning the zipper in place to mark the lenght I need.

Step 11:

我向所需的长度添加〜2cm并在拉链的顶部(其中狗关闭时)切割过量)。然后我将这两个花瓣弯曲到两侧并用接缝保护它们。

Step 12:

Now the zipper fits ferfectly... well... in your case, because when you will be making your vest you'll already be familiar with that part, where I'm talking about the thing that didn't work the way I thought, so you'll know how to make it right... but that's for later.

I'm separating the zipper it two parts for convenience of use. Than I'm placing one part under the plap created by the cut and basting it on place through all four layers. The same for the second part.

Step 13:

此时,我们的背心可以从框架(或者不是,如果你通过手缝制)。但首先,在它仍然伸展时切断一些“不想”的碎片是方便的。所以我正在切出颈部开口和碎片。在切断擦拭时准确,因为我们将用它们制作口袋并在芬清时把它们放在一边。此时你也可以切断底部,但我决定留下一点。

最后切割拉链两半之间的铰孔织物。

删除框架。不要因为我们的星星使用它而离开。

Step 14:

现在它是缝纫机时间。

I'm using bright yellow colored thread to match the yellow t-shirt.

沿着颈部围绕击打,在底部缝制,缝制拉链。

At this point I'm cutting off the bottom.

删除植物不再被束缚。

第15步:

这种设计的重要组成部分是覆盖物品的所有表面的挂钩系列,从而创造了独特的纹理和实用的所有层叠织物。

I have to admit, it's a bit tedious process, making all those seams, but the result is quiet unique looking, so it totally worth it.

So, to start, use the edge of the foot of your sewing machine as a guide and the seam that holds the zipper as a guiding line. It's practicaly convenient to start the seam at the bottom moving up to the shoulders. Make all seams mooving in the same dirrection and use every new one as a guide line for the next.

表面上的皱纹将不可避免地形成。特别是在接缝的末端。它由脚踏运动换档和拉伸顶层织物,从而缓解效果试图减少脚踏的推力,在缝纫机上的推动力和时间抬起后释放张力。其他方面蔓延地展开仍然形式的皱纹,以均匀地形式,并缝制它们。一般而言,这种文物非常好地补充了整体风格。但它仍然可以在某些地方看起来很丑,就像在我的情况下......所以没有保证那里..

The other thing about my case worth mentioning are troubles I went into with the thread I used. It was spool of old cotton thread I grabbed from the basket of threads we have. It was too weak and kept snipping all the time. For this reason I wasn't able to regulate the thread tension correctly. It all resulted in missed stitches at some parts and overlaping seames where I had to start the seam anew which you can see on the photos. It kind of worked with the overall aestetics but practicly it was a mess. Anyway I had to continue using this thread atleast to fill all the front side of the vest because the new one I bought was a bit thinner and the difference would be notacible. With new polyester thread I had no problems, So yeah.. the thread is important.

无论如何......保持平行接缝从拉链移动到侧面,然后在那里停止。填充前面的两半。删除Basting,在那里它不再是否定。

第16步:

在后面沿着中心线缝制。而不是用它作为指导并从中移动到两侧。这种方式即使在后面和前部的地方会满足一些非平行或不规则的地方,它将在两侧,在那里不明显。

第17步:

这一点Ialready能够看到一些事情不会像我想象的那样工作。我想象切断的边缘将卷绕这种类型的面料通常露出明亮的黄色材料。这种效果比我预期的效果要多得多,所以我决定以更具人造的方式达到所需的外观。这可能是,你也必须做的。

因此,我将织物分开在两个部分的边缘。我把一个部分折叠了一个部分,另一个部分到了后面并缝制了它。在这一点上,我对切割时,我对我不太准确,因为边缘在地方漂亮崎岖不平。

在拉链,让我的生活有点易变,我只折叠了两个顶层。

你可以看到拉链现在是如何在底部伸出的,而在缝制和折叠边缘之前,它与边缘齐平。这就是我以前在谈论的内容。定位拉链时进行调整。

第18步:

此时我必须处理口袋,但我有点累了这个项目,所以我直接跳到了有趣的部分。

Here I wanted to replicate the distinctive quality of boro fabrics I mentioned earlier. By cutting the top black layer of fabric I wanted to reveal contrasting underlying yellow one, creating vivid decorative effect. But once again... it turned out not that vivid in the result. Who knows, maybe it'll become more visually distinctive after couple of washes, or it's the quality of this particular t-shirt...

Anyway, on the other hand it looks really cool when stretched, so if you find yourself in the Alien movie suspecting to vave a chestburster within... just wear this vest... it'll be cool!

所以,我在那里实际做了什么。

所有的射击都从蛋糕包装中取出了塑料盖,用它使用它在背心的胸部区域上用一块干燥的肥皂绘制一个圆圈(这是我以前用于制造所有这些标记的东西)。它可以是你想要的任何形状,因为它不是太复杂。然后,与那些带有尖端的小剪刀,我将接缝在拉伸圆面积内的接缝之间切割顶层。

第19步:

我也在后面做了同样的事情。

Once again, it looks really cool, when streched.

Step 20:

So, now it's time to deal with pockets. This is where we're making use from those sleave cut offs. I'm using just two pairs of them because there's no need for the fabric to be too thick here.

Otherwise there's nothing principaly new here and all the steps are shown on the photos.

Step 21:

几个最后的触感:切断伸出螺纹的末端,使肩膀上的丑陋部分有点更好,这里有一些细节,我们已经完成了。

我也想附上一个帽子,但我没有剩下任何不需要的T恤,所以,也许,我会在一段时间后会这样做并将其发布为更新。

Step 22:

So, this is it for now, thank you for your attention and have a nice boro.

P.S.(从10,3,2017):我一直在浏览工艺类别中的旧乐器并发现这个by青少年涂鸦。基本上这是相同的想法,但她正在制作一条毯子,所以我建议你检查一下。

If you like what I'm doing and want to see more projects from me with with increasing qualitie, please considere to support me onPatreon

缝酷比赛

Second Prize in the
缝酷比赛

1人制作这个项目!

Recommendations

  • Zipper Speed Challenge

    Zipper Speed Challenge
  • Stuffed Toys Speed Challenge

    Stuffed Toys Speed Challenge
  • 雕刻和雕刻挑战

    雕刻和雕刻挑战

13评论

0
knopfling.

3年前

哇,太快:只是,平,意思,......

0
lozchik.

3年前

While I don't think I'll make this vest anytime soon (no sewing machine), I'm glad you introduced me to the concept of boro. I have a lot of different things that are too old to really wear or donate but I love the colors. It's more practical than making yet ANOTHER rag rug.

0
Waldemar Sha

Reply 3 years ago

谢谢你的回应。我目前正在使用同一技术的另一个项目,所以在几天内检查它。

0
zzzzzzzzzzzz.

3年前

Oh my oh my !!! so much patience and precision... and i know what i'm talking about since i've been sewing quite a number of years now !!! Very clever idea that is so close to the inspiring fabric !!! Bravo !!!

0
Waldemar Sha

Reply 3 years ago

谢谢ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ。

0
vbanaszak

3年前

我喜欢这个很多!我认为这是一个好主意。

0
Waldemar Sha

Reply 3 years ago

Thank you.

0
OutofPatience

3年前

这是一个有用的指导,良好的想法激发了灵感。谢谢!

0
Waldemar Sha

Reply 3 years ago

Thank you.

0
knopfling.

3年前

This is fantastic! I love the subtle effect of the open cuts.

指导是非常合理的,我已经搜索了T恤!

伟大的!

0
Waldemar Sha

Reply 3 years ago

Thanks for the repy. That's very nice :)

0
Pamala.Leonard.

3年前

Very inspiring! Thanks for sharing.

0
Waldemar Sha

Reply 3 years ago

谢谢。很高兴你喜欢。